OBSCURE OCTOPUS

FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.

As an Amazon Associate I earn from qualifying purchases.

ESP32-C6 and 60 GHz mmWave radar

14 Nov 2026 · original hardware writeup

A Breath Away is the presence build: a Cheap Yellow Display plus a Seeed XIAO ESP32-C6 plus a 60 GHz mmWave module (MR60BHA1 class). The C6 talks to the radar over UART, fuses detections, and the CYD draws the tactical view.

Why C6

Wi-Fi 6 and BLE 5 on a tiny board, 3.3 V logic, enough UART. The radar wants a quiet 5 V / 3.3 V rail and a dedicated serial line. Do not share that UART with a USB console if you can avoid it.

What the radar actually reports

60 GHz modules in this class give presence, range, and sometimes breath-like motion. They are not cameras. Drywall and glass behave differently than a person in free space. Mount height and a 30–60 second empty-room baseline matter more than firmware flags.

Do not confuse this with the P4 7B C6

The ESP32-P4-WIFI6-Touch-LCD-7B has an onboard ESP32-C6-MINI-1 over SDIO for Wi-Fi. Its corner PH2.0 4-pin header is C6 UART0 for the hosted slave, not a radar port, and it is not isolated. We never hang mmWave or K-line on that header.

Parts