OBSCURE OCTOPUS

FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.

As an Amazon Associate I earn from qualifying purchases.

Isolated USB-TTL for Suzuki SDS (ISO111-E2)

11 Nov 2026 · original hardware writeup

The adapter on this bench is the FOINNEX ISO111-E2. USB-A, CH340, 3.3/5 V switch, 1.25 mm and 2.54 mm headers, no CTS/RTS. Linux: QinHeng 1a86:7523 on /dev/ttyUSB0 via ch341, 10400 8N1 for SDS.

Green LED is isolated TTL-side power. USB power alone does not light it. Red is the computer transmitting. Blue is a byte received back. Enumeration only proves the USB side.

Galvanic isolation separates the PC from the TTL pins. It does not drive 12 V K-line. One L9637 sits between the dongle and the dealer pin. Dongle TX→L9637 TX, RX→RX, VCC→VCC. L9637 K to SDL. Grounds on the bike stay on the bike side of the isolator.

We chose isolation on purpose. A non-isolated USB-TTL plus a running motorcycle is how you lift a laptop ground and eat an adapter. The P4 7B C6 UART header is also not isolated — BSS138 only — so it is not this path.