FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.
As an Amazon Associate I earn from qualifying purchases.
Parts list: Suzuki K-line and Pi CAN
12 Nov 2026 · original parts list
K-line path (VL800 SDS class)
- FOINNEX ISO111-E2 isolated USB-TTL(paid link) — FOINNEX ISO111-E2 galvanically isolated USB-TTL, CH340, ASIN B0FGX42GYB. Set the dongle to 5 V. TX is logic-only (~3.5 mA). It is not a K-line driver.
- ST L9637 ISO9141 transceiver — ST L9637D ISO9141 transceiver. Dealer SDS pin to L9637 K, ignition 12 V to VS, dongle TX/RX/VCC to the TTL side. 510 Ω pull-up on K if the module does not include it.
- White 6-pin dealer-mode coupler under the right side cover on the VL800. SDL is the ECM serial-data line, idle near battery voltage. Do not short the white/red and black/white mode-select jumper.
CAN path
Rules we keep on the card
- Do not tie USB ground to bike ground.
- Do not put dongle TX/RX on the 12 V SDL pin.
- Ignition on, or the ECU stays mute.
- The ISO111-E2 isolation barrier is USB-to-TTL. It does not level-shift K-line by itself.