FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.
As an Amazon Associate I earn from qualifying purchases.
The desk logger is KASH SxS on a Raspberry Pi Zero 2 W with the Waveshare RS485 CAN HAT(paid link) (MCP2515, SPI0, GPIO25 IRQ, 12 MHz crystal).
--osc 8000000. Default in our tree is 12 MHz.sudo bash setup_pi_zero.sh # reboot, then python3 sxs.py --demo # page: http://<pi>:8080/
ISO-TP/UDS reads and writes go through isotp.py and uds.py. A write is accepted only on a positive ECU response. Confirm string is write. Backups land in ~/kash/ecu/.
Pi 5 builds (K.A.S.H comms appliance) use the same MCP2515 idea plus K-line on a separate transceiver. The Zero 2 W hat is the small logger. A Raspberry Pi 5 is the heavier appliance, not a drop-in for this overlay.