OBSCURE OCTOPUS

FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.

As an Amazon Associate I earn from qualifying purchases.

AXP2101, QMI8658, and what the watch face can honestly show

9 Nov 2026 · original hardware writeup

On the Waveshare 2.06 the PMIC is AXP2101 at I2C 0x34. Percent is register 0xA4. The companion can push a battery write over BLE; the face also reads the PMIC. Charge current and USB presence come from the same chip, not from Android.

IMU is QMI8658 at 0x6B (alt 0x6A). WHOAMI 0x05. We run gyro 64 dps at 224.2 Hz because SensorLib has no 250 Hz enum. Compass on this board is integrated gyro. It drifts. There is no magnetometer. Do not calibrate it like a phone compass.

RTC is PCF85063 at 0x51. Phone Current Time (GATT 0x1805 / 0x2A2B) overwrites it when the companion connects.

HR, SpO2, temperature, stress on the vitals tile are opcodes from the phone. This PCB has no PPG LED or AFE. If a listing promises optical HR on this exact Waveshare module, it is selling a different board.