OBSCURE OCTOPUS

FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.

As an Amazon Associate I earn from qualifying purchases.

Waveshare RS485 CAN HAT notes from a live vehicle

8 Nov 2026 · original hardware writeup

Default hat in KASH SxS is the Waveshare RS485 CAN HAT (MCP2515). MCP2515, SPI0, IRQ on GPIO25, 12 MHz. The 2-CH CAN FD HAT Rev2.1 is a different overlay (--hat fd-rev21) and has no RS485 terminal.

On the shop-display Pi Zero 2 W we also drive a Waveshare 5-inch HDMI (800×480). Resistive touch wants SPI and a GPIO. GPIO25 is already the CAN IRQ. That collision is real: pick CAN or HDMI touch, not both on that pin.

Listen before you write. 500 kbit then 250 kbit. Stock Can-Am and Polaris flash services are not a public CAN command in this project. Factory writers stay BUDS and Digital Wrench. Local fuel/spark trim JSON lives on the Pi under ~/kash/tunes/.