FTC disclosure (16 CFR 255.5). Vendor buttons and product links on this page go through /go/ and are affiliate links. Obscure Octopus LLC may earn a commission if you buy, at no extra cost to you. A commission or a free review unit is a material connection. This notice sits here, next to the links, not only in the footer. Writeups are original bench notes.
As an Amazon Associate I earn from qualifying purchases.
This is the wrist board behind Octopus OS on obscureoctopus.tech. Chip is ESP32-S3 QFN56 rev 0.2, octal PSRAM, AXP2101 fuel gauge, PCF85063 RTC, QMI8658 IMU, 410×502 AMOLED. It enumerates as Espressif USB JTAG/serial 303a:1001.
Buy the module from Waveshare ESP32-S3-Touch-AMOLED-2.06(paid link). Wiki and pinout live on the Waveshare wiki. We flash it with ESP-IDF 5.5.1 and the Octopus Tactical tree.
https://obscureoctopus.tech/firmware/*.bin.Hold BOOT if the serial picker is empty. Offsets: bootloader 0x0, partition table 0x8000, otadata 0xd000, app 0x10000. Flash mode dio, 80 MHz, 16 MB header, 921600 baud. The live USB tool is folded under “Blank board?” on the companion. From a shell:
python3 -m esptool --chip esp32s3 --port /dev/ttyACM0 --baud 921600 write_flash \ --flash_mode dio --flash_freq 80m --flash_size 16MB \ 0x0 bootloader.bin 0x8000 partition-table.bin \ 0xd000 ota_data_initial.bin 0x10000 octopus-tactical.bin
A good boot prints octopus: boot then octopus: ready, NimBLE as InfiniTime, QMI8658 at 0x6b.
2.5.0 added HTTPS OTA. Pair the watch over Bluetooth, save SSID and password, tap Update watch. Opcode 11 tells the watch to pull https://obscureoctopus.tech/firmware/octopus-tactical.bin and write the other OTA slot. Keep the phone page open until it reports reboot.
No PPG, no NFC, no magnetometer. Compass heading is gyro-integrated and drifts. Vitals on the face are phone-pushed. Do not buy this module expecting a heart-rate LED.